Access List - Draytek Vigor 2200VG User Manual

Residential broadband router
Hide thumbs Also See for Vigor 2200VG:
Table of Contents

Advertisement

Management Setup
The port number used to send/receive SIP message for building a
session. The default value is 5060 and this must match with the peer
Registrar when making VoIP calls.
Enable remote
firmware update
Allow management
from the Internet
Disable PING from the
Internet

Access List

You could specify that the system administrator can only login from a
specific host or network defined in the list. A maximum of three
IPs/subnet masks is allowed.
IP
Subnet Mask
System Maintenance Setup
Chick the checkbox to allow remote firmware upgrade
through FTP (File Transfer Protocol).
Enable the checkbox to allow system administrators to
login from the Internet. By default, it is not allowed.
Check the checkbox to reject all PING packets from the
Internet. For security issue, this function is enabled by
default.
Indicate an IP address allowed to login to the router
Represent a subnet mask allowed to login to the router.
11-6

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vigor 2200v

Table of Contents