Table of Contents
Advertisement
1.1 Introduction
The Quick Start Wizard is designed for you to easily set up your broadband
Internet access. We already integrated Quick Start Wizard into the Web
Configurator of Vigor2200V/VG series. You can directly access the Quick
Start Wizard via Web Configurator.
1.2 Configure Your Router via Quick Start Wizard
Step 1.
Open the web browser on a PC which is connected to the router and
then link to the gateway IP address of the router (the default setting is
192.168.1.1). Once your link (http://192.168.1.1) is successful, a
pop-up window will open to ask for username and password. Leave the
default null value and press OK to continue.
If you fail to access to the web configuration, please refer to "Trouble
Shooting" guide.
Quick Start Wizard
1-1
Vigor2200V series
Chapter 1
Hide quick links:
Advertisement
Table of Contents
