Management Port Setup
Default Ports
User Defined Ports
Enable SNMP Agent
Get Community
Set Community
Manager Host IP
Trap Community
Notification Host IP
Reboot System
The Web Configurator may be used to restart your router. Click Reboot
System in the main menu to open the following page.
If you want to reboot the router using the current configuration, check
Using current configuration and click OK. To reset the router settings
to default values, check Using factory default configuration and click
OK. The router will take 3 to 5 seconds to reboot the system.
System Maintenance Setup
Check to use standard port numbers for the Telnet and
HTTP servers.
Check to specify user-defined port numbers for the Telnet
and HTTP servers.
Chick the checkbox to enable built-in SNMP agent.
Specify a string to identify the management communities
for the SNMP GET command.
Specify a string to identify the management communities
for the SNMP SET command.
Specify the IP address of the SNMP manager station.
Specify a string to identify the management communities
for the SNMP TRAP notifications.
Specify the IP address of the station that wants to receive
the TRAP notifications
11-7