Replacing Staples (1,000-Sheet Finisher) - Kyocera TASKalfa 4012i Operation Manual

Troubleshooting > Regular Maintenance

Replacing Staples (1,000-Sheet Finisher)

When the Staple Unit runs out of staples, the following messages will be displayed. The staple cartridge holder need to
be replenished with staples.
"Staple is empty."
NOTE
If the Staple Unit runs out of staples, contact your dealer or service representative.
1
2
3
Open the finisher front cover.
Remove the Staple Cartridge Holder.
Replace the staples.
2
1
1
10-10