Border Erase - Kyocera TASKalfa 4012i Operation Manual

Using Various Functions > Functions
*1 The input units can be changed in System Menu.
Measurement (page 8-15)
*2 This function can only be used when the optional OCR Scan Activation Kit is installed.
*3 Not displayed when printing from removable memory.
Sending/Storing
When you have sent/stored the original after specifying the original size and sending/storing size, depending on these
sizes, a margin is created at the bottom, left, or right side of paper. By using the Centering function, the image is placed
with a margin equally created for all edges.
(Value: [Off] / [On])

Border Erase

Layout/Edit
Copy
Erases the black border that forms around the image.
The following modes are available.
Border Erase Sheet
Original
Border Erase Book
Original
Individual Border Erase
Original
NOTE
• The default setting for border erase width can be changed.
Border Erase Default (page 8-19)
• The default width for back page can be changed.
Border Erase to Back Page (page 8-19)
Advanced
Custom
Send
Setup
Box
Erases black borders around the single sheet original.
Copy
Erases black borders around the edges and in the middle of the original such
as a thick book. You can specify the widths individually to erase the borders
around the edges and in the center of the book.
Copy
You can specify border erase widths individually for all edges.
Copy
Functions USB Functions
Memory
6-39