Assembly - Nautilus T628 Assembly Manual / Owner's Manual

shown in the appropriate work space (
1. Fold the Walking Deck on the Base Assembly
Once the Base Assembly has been properly placed in the workout area, cut the Shipping Strap. Press and hold the plastic
deck release handle (5a) under the end of the right side rail. Using the support bar (5b) found below the rear of the walk-
ing belt, lift the walking deck and continue to hold the deck handle for the rst part of the fold process (0-15 degrees).
Release the deck handle and lift the walking deck fully upward to engage the hydraulic lift. Be sure that the hydraulic lift is
correctly locked in place.
and pull up equally with both arms. Straighten your legs to lift. Make sure that your own physical strength is
necessary.
Do not use the walking belt or rear roller to lift the treadmill. These parts do not lock in place and can
abruptly move. Injury to you or damage to the machine can occur.
Make sure that the locking mechanism is engaged. Carefully pull back on the Walking Deck and make sure that it does
not move. When you do this, keep clear of movement path in case the treadmill lock is not engaged.
Do not lean against the treadmill when it is folded. Do not put items on it that could cause it to become
unstable or fall.
15°
5a
*
).
*
5

ASSEMBLY

5b
5a
11