Hardware; Tools; Before Assembly - Nautilus T614 Assembly Manual / Owner's Manual

HARDWARE / TOOLS / BEFORE ASSEMBLY
Item Qty Description
A 4
Socket Head Hex Screw, M8x50
B 8 Socket Head Hex Screw, M8x16
C Phillips Head Screw, M5x14
2

Tools

Included
#2
6 mm
6 mm

Before Assembly

Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a
hard, level surface. Allow a workout area of a minimum 83.2" x 151.2" (211.3 cm x 384 cm). Be sure that the workout space
you are utilizing has adequate height clearance, taking into consideration the height of the user and the maximum incline of
the machine.
Basic Assembly Tips
Follow these basic points when you assemble your machine:
• Read and understand the "Important Safety Instructions" before assembly.
• Collect all the pieces necessary for each assembly step.
• Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left (counter-
clockwise) to loosen, unless instructed otherwise.
• When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt through the holes.
• The assembly can require 2 people.
10
A B C
Not Included
(recommended)
D E F
Item Qty Description
D
10 Self Tapping Screw, M4.2x16
E Lock Washer, M8
12
F Flat Washer, M8
12