Specifications; Before Assembly - Nautilus T626 Assembly Manual

SPECIFICATIONS / BEFORE ASSEMBLY
89.4 cm
( 35.2")
DO NOT dispose of this product as refuse. This product is to be recycled. For proper disposal of this product,
please follow the prescribed methods at an approved waste center.

Before Assembly

Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a
hard, level surface. Allow a workout area of a minimum 211.3 cm x 396.7 cm ( 83.2" x 156.2" ). Be sure that the workout
space you are utilizing has adequate height clearance, taking into consideration the height of the user and the maximum
incline of the machine.
Basic Assembly Tips
Follow these basic points when you as-
semble your machine:
• Read and understand the "Important
Safety Instructions" before assembly.
• Collect all the pieces necessary for
each assembly step.
• Using the recommended wrenches,
turn the bolts and nuts to the right
(clockwise) to tighten, and the left
(counterclockwise) to loosen, unless
instructed otherwise.
• When attaching 2 pieces, lightly lift
and look through the bolt holes to help
insert the bolt through the holes.
• The assembly can require 2 people.
8
Maximum User Weight:
Total Surface Area (footprint) of equipment: 17522.4 cm
Power Requirements:
146.3 cm
( 57.6")
Operating Current:
Maximum Inclined Deck Height:
Assembled Weight:
196 cm
( 77.2")
Sound Emission:
Complies with the following:
Connectivity:
2.11m
( 83.2" )
Operational Voltage:
load. Noise emission under load is higher than without load.
ISO 20957 Compliant
3.97m ( 156.2" )
0.6m
( 24" )
0.6m
( 24" )
136 kg (300 lbs)
2
220V - 240V AC, 50Hz
8 A
43.7 cm (17.2 inches)
Approx. 97.5 kgs (215 lbs)
Less than 70 db average without
SAA Compliant
2m
( 79" )