Belkin F5D8232-4 User Manual page 91

Manually Configuring Network Settings
Manually Configuring Network Adapters in Windows 98SE or Me
1.
Right-click on "My Network Neighborhood" and select
"Properties" from the drop-down menu .
2.
Select "TCP/IP Settings" for your installed network adapter. You
will see the following window .
(1)
(2)
3.
If "Specify an IP address" is selected, your N1 Vision will need to
be set up for a static IP connection type . Write the address
information in the table below . You will need to enter this
information into the N1 Vision .
4.
Write the IP address and subnet mask from the "IP Address"
(3)
tab .
5.
Click the "Gateway" tab
the chart .
6.
Click the "DNS Configuration" tab
in the chart .
7.
If not already selected,
select "Obtain IP
address automatically"
on the IP address tab .
Click "OK" .
Restart the computer. When the computer restarts, your network
adapter(s) are now configured for use with the N1 Vision.
(2)
. Write the gateway address down in
(1)
. Write the DNS address(es)
87
(3)
1
2
3
4
5
6
7
8
9
10