Belkin F5D8232-4 User Manual page 41

Alternate Setup Method
Setting your Internet Service Provider (ISP) Connection Type to Static IP
A static IP address connection type is less common than other
connection types . If your ISP uses static IP addressing, you will
need your IP address, subnet mask, and ISP gateway address . This
information is available from your ISP or on the paperwork that your
ISP left with you . Type in your information, then click "Apply Changes"
(5)
. After you apply the changes, the Internet Status indicator will
read "connection OK" if your N1 Vision is set up properly .
1. IP Address
Enter the IP address that has been provided by your ISP here .
2. Subnet Mask
Enter the subnet mask that has been provided by your ISP here .
3. ISP Gateway Address
Enter the gateway address that has been provided by your ISP here .
4. My ISP Provides More Than One Static IP Address
If your ISP assigns you more than one static IP address, your N1
Vision is capable of handling up to five static WAN IP addresses .
Select "My ISP provides more than one static IP address" and
enter your additional addresses .
(5)
37
(1)
(2)
(3)
(4)
1
2
3
4
5
6
7
8
9
10