Belkin F5D8232-4 User Manual page 60

Using the Web-Based Advanced User Interface
Setting WPA/WPA2-Personal (PSK)
Like WPA security, WPA2 is available in WPA2-Personal (PSK) mode .
Typically, WPA2-Personal (PSK) is the mode that will be used in a
home environment . This guide will focus on WPA2-Personal (PSK)
usage . Please refer to the User Manual for more information about
wireless security and different types of wireless security .
1.
After you've set up your N1 Vision, go to the "Security" page
under "Wireless" and select "WPA/WPA2-Personal (PSK)" from the
"Security Mode" drop-down menu .
2.
For "Authentication", select "WPA-PSK", "WPA2-PSK", or
"WPA-PSK + WPA2-PSK" . This setting will have to be identical
on the wireless clients that you set up . "WPA-PSK + WPA2-PSK"
mode will allow the N1 Vision to support clients running either
WPA or WPA2 security .
4.
Enter your pre-shared key (PSK) . This can be from eight to 63
characters and can be letters, numbers, or symbols . This same
key must be used on all of the wireless clients that you set up .
For example, your PSK might be something like: "Smith family
network key" . Click "Apply Changes" to finish . You must now set
all wireless clients to match these settings .
56 56