Belkin F5D8232-4 User Manual page 47

Alternate Setup Method
4. User Decide Login Server Manually
If your login server IP address is not available in the "Select Your
State" drop-down menu
server IP address by placing a check in the box next to "User
decide login server manually" and type in the address next to
"Login Server"
Setting Custom Domain Name Server (DNS) Settings
A "Domain Name Server" is a server located on the Internet that translates
Universal Resource Locaters (URLs) like "www .belkin .com" to IP addresses .
Many Internet Service Providers (ISPs) do not require you to enter this
information into the N1 Vision . The "Automatic from ISP" box
be checked if your ISP did not give you a specific DNS address . If you are
using a static IP connection type, then you may need to enter a specific
DNS address and secondary DNS address for your connection to work
properly . If your connection type is dynamic or PPPoE, it is likely that you
do not have to enter a DNS address . Leave the "Automatic from ISP" box
checked . To enter the DNS address settings, uncheck the "Automatic from
ISP" box and enter your DNS entries in the spaces provided . Click "Apply
(2)
Changes" to save the settings .
(1)
, you may manually enter the login
(5)
.
(1)
(2)
43
(1)
should
1
2
3
4
5
6
7
8
9
10