Belkin F5D8232-4 User Manual page 7

Introduction
If you have concerns about your network's performance that might be
related to range or obstruction factors, try moving the computer to a
position between five and 10 feet from the N1 Vision in order to see
if distance is the problem . If difficulties persist even at close range,
please contact Belkin Technical Support .
Note: While some of the items listed below can affect network
performance, they will not prohibit your wireless network from
functioning; if you are concerned that your network is not operating at
its maximum effectiveness, this checklist may help .
1. N1 Vision
Place your N1 Vision, the central connection point of your
network, as close as possible to the center of your wireless
network devices .
To achieve the best wireless network coverage for your "wireless
clients" (i .e ., computers enabled by Belkin Wireless Notebook
Network Cards, Wireless Desktop Network Cards, and Wireless
USB Adapters):
• E nsure that your N1 Vision's networking antennas are parallel
to each other, and are positioned vertically (toward the
ceiling) . If your N1 Vision itself is positioned vertically, point
the antennas as much as possible in an upward direction .
• I n multistory homes, place the N1 Vision on a floor that is as
close to the center of the home as possible . This may mean
placing the N1 Vision on an upper floor .
• T ry not to place the N1 Vision near a cordless 2.4GHz phone.
2. Avoid Obstacles and Interference
Avoid placing your N1 Vision near devices that may emit radio
"noise," such as microwave ovens . Dense objects that can inhibit
wireless communication include:
• Refrigerators
• Washers and/or dryers
• Metal cabinets
• Large aquariums
• Metallic-based, UV-tinted windows
If your wireless signal seems weak in some spots, make sure that
objects such as these are not blocking the signal's path (between
your computers and N1 Vision) .
3
1
2
3
4
5
6
7
8
9
10