Belkin F5D8232-4 User Manual page 54

Using the Web-Based Advanced User Interface
Changing the Wireless Channel
There are a number of operating channels from which you can
choose—in the United States, there are 11 and in the United Kingdom
(and most of Europe), there are 13 . In a small number of other countries,
there are other channel requirements . Your N1 Vision is configured to
operate on the proper channels for the country in which you reside . The
channel can be changed if needed . If there are other wireless networks
operating in your area, your network should be set to operate on a
channel that is different than the other wireless networks .
Using the Wireless Mode Switch
This switch allows you to set the N1 Vision's wireless modes . There are
several modes .
Note: Some modes may require firmware updates to be enabled.
1)
802.11b+g+n
Setting the N1 Vision to this mode will allow 802 .11b-, 802 .11g-, and
802 .11n-compliant devices to join the network .
2)
Off
This mode will turn OFF the N1 Vision's access point, so no
wireless devices can join the network . Turning off the wireless
function of your N1 Vision is a great way to secure your network
when you are away from home for a long period of time, or don't
want to use the wireless feature of the N1 Vision at a certain time .
IEEE 802.11b or 802.11g operation of this product in the U.S.A.
is firmware-limited to channels 1 through 11.
50 50