Belkin F5D8232-4 User Manual page 90

Manually Configuring Network Settings
Manually Configuring Network Settings in Windows 2000, NT
1.
Click "Start", "Settings", then "Control Panel" .
2.
Double-click on the "Network and dial-up connections" icon
(Windows 2000) or the "Network" icon (Windows XP) .
3.
Right-click on the "Local Area Connection" associated with
your network adapter and select "Properties" from the
drop-down menu .
4.
In the "Local Area Connection Properties" window, click "Internet
Protocol (TCP/IP)" and click the "Properties" button. The
following screen will appear:
(1)
(2)
(3)
5.
If "Use the following IP address"
will need to be set up for a static IP connection type . Write the
address information the table below . You will need to enter this
information into the N1 Vision .
6.
If not already selected, select "Obtain an IP address
automatically"
(3)
. Click "OK" .
Your network settings are now configured for use with the
N1 Vision.
(1)
and "Obtain DNS server address automatically"
(2)
is selected, your N1 Vision
86 86
, or XP
®