Alternate Setup Method
Step 1
Hardware Connections – Follow the
Quick Installation Guide (QIG)
See the QIG or Step 1: Hardware Connections from the
previous section .
Step 2
Set your Computer's Network Settings to Work
with a DHCP Server
See the section in this User Manual called "Manually Configuring
Network Settings" for directions .
Step 3
Configuring the N1 Vision Using the Web-Based
Advanced User Interface
Using your Internet browser, you can access the N1 Vision's
Web-Based Advanced User Interface . In your browser, type
"192.168.2.1" (do not type in anything else such as "http://" or
"www") . Then press the "Enter" key .
30
30