Belkin F5D8233 User Manual
  1. Manuals
  2. Brands
  3. Belkin Manuals
  4. Network Router
  5. F5D8233
  6. User manual

Belkin F5D8233 User Manual

Hide thumbs Also See for F5D8233:
Table of Contents

Advertisement

Quick Links

Download this manual
16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc
Page 1 of 108
N Wireless Router
User Manual
F5D8233-4v3
P75445-A
Ok-mk 9/5/07
F5D8233tt4
P75445tt-A
Splash Screen

Table of Contents

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Advantages of a Wireless Network................................1
Placement of your N Wireless Router. . . . . . . . . . . . . .3
2 Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
3 Knowing your Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
4 Connecting and Configuring your Router . . . . . . . . . . . . . . .15
5 Alternate Setup Method . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Changing LAN Settings . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Viewing the DHCP Client List Page . . . . . . . . . . . . . . . . . 41
Setting WPA Security. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Setting WEP Encryption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Using the Access Point Mode . . . . . . . . . . . . . . . . . . . . . .52
Setting MAC Address Control . . . . . . . . . . . . . . . . . . . . . .53
Configuring the Firewall . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Using Dynamic DNS..............................................59
Utilities. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Restarting the Router . . . . . . . . . . . . . . . . . . . . . . . . . 61
Updating the Firmware . . . . . . . . . . . . . . . . . . . . . . . . 66
8 Recommended Web Browser Settings . . . . . . . . . . . . . . . . .79
9 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
10 Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97

Advertisement

Table of Contents
loading

Related Manuals for Belkin F5D8233

Summary of Contents for Belkin F5D8233

  • Page 1: Table Of Contents

    16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 1 of 108 N Wireless Router User Manual F5D8233-4v3 P75445-A Ok-mk 9/5/07 F5D8233tt4 P75445tt-A Splash Screen Table of Contents 1 Introduction ........1 Advantages of a Wireless Network…………………………..1...

  • Page 2: Introduction

    • Simultaneously play games online, check Internet email, and chat Advantages of a Wireless Network Here are some of the advantages of setting up a Belkin Wireless Network: • Mobility – you’ll no longer need a dedicated “computer room”—now you can work on a networked laptop or desktop computer anywhere within your wireless range •...

  • Page 3: Placement Of Your N Wireless Router

    Belkin’s N MIMO helps traffic move at the speed limit and opens more lanes—to become the superhighway in this example. The rate of traffic flow is multiplied by the number of lanes that are opened.
  • Page 4 To achieve the best wireless network coverage for your “wireless clients” (i.e., computers enabled by Belkin Wireless Notebook Network Cards, Wireless Desktop Network Cards, and Wireless USB Adapters): • Ensure that your Router’s networking antennas are parallel to each other, and are positioned vertically (toward the ceiling).
  • Page 5 • For Belkin wireless networking products, use the detailed Site Survey and wireless channel information included with your wireless network card. See your network card’s user guide for more information.

  • Page 6: Product Overview

    In minutes you will be able to share your Internet connection and network your computers. The following is a list of features that make your new Belkin N Wireless Router an ideal solution for your home or small office network.
  • Page 7 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 7 of 108 Web-Based Advanced User Interface You can set up the Router’s advanced functions easily through your web browser, without having to install additional software onto the computer. There are no disks to install or keep track of and, best of all, you can make changes and perform setup functions from any computer on the network quickly and easily.
  • Page 8 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 8 of 108 The Setup Assistant, second generation of Belkin’s renowned Easy Install Wizard, takes the guesswork out of setting up your Router. This automatic software determines your network settings for you and sets up the Router for connection to your Internet Service Provider (ISP). In a matter of minutes, your Router will be up and running on the Internet.

  • Page 9: Knowing Your Router

    Knowing your Router Package Contents • Belkin N Wireless Router • Quick Installation Guide • Belkin Setup Assistant Software CD • RJ45 Ethernet Networking Cable • Power Supply • User Manual on the Setup Assistant CD • Network Status Display Guide •...
  • Page 10 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 10 of 108 Knowing your Router The Router has been designed to be placed on a desktop. All of the cables exit from the rear of the Router for better organization and utility. The Network Status Display is easily visible on the FRONT of the Router to provide you with information about network activity and status.
  • Page 11 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 11 of 108 Solid Blue Router is connected to modem and functioning properly Blinking Problem with modem Amber F. Internet Status [insert N Wireless Router Globe Icon] This unique icon shows you when the Router is connected to the Internet. When the light is off, the Router is NOT connected to the Internet.

  • Page 12: Connecting And Configuring Your Router

    Verify the contents of your box. You should have the following: • Belkin N Wireless Router • RJ45 Ethernet Networking Cable • Power Supply • Belkin Setup Assistant Software CD • User Manual on the Setup Assistant CD • Network Status Display Guide • Wireless Security Setup Guide Modem Requirements Your cable or DSL modem must be equipped with an RJ45 Ethernet port.
  • Page 13 Ethernet Setup Assistant Belkin has provided our Setup Assistant software to make installing your Router a simple and easy task. You can use it to get your Router up and running in minutes. The Setup Assistant requires that your computer be connected directly to your cable or DSL modem and that the Internet connection is active and working at the time of installation.
  • Page 14 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 14 of 108 D. Plug in your modem’s power cord. Wait 60 seconds for the modem to start up. Plug the Router’s power supply into the black port on the back. Plug the other end into the wall outlet. [insert line art from QIG] E.
  • Page 15 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 15 of 108 Note for Windows Users: If the Setup Assistant does not start up automatically, select your CD-ROM drive from “My Computer” and double- click on the file named “SetupAssistant” to start the Setup Assistant. Confirmation Screen Verify that you have completed all QIG steps by checking the box to the right of the arrow.
  • Page 16 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 16 of 108...
  • Page 17 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 17 of 108 Progress Screen Setup Assistant will show you a progress screen each time a step in the setup has been completed. <Insert: EZI_4.tif>...
  • Page 18 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 18 of 108 1.1 Checking Settings The Setup Assistant will now examine your computer’s network settings and gather information needed to complete the Router’s connection to the Internet. 1.2 Verifying Hardware Connections The Setup Assistant will now verify your hardware connection. [insert EZI_5.tif]...
  • Page 19 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 19 of 108 1.3 Naming your Wireless Network The Setup Assistant will display the default wireless network name or Service Set Identifier (SSID). This is the name of your wireless network to which your computers or devices with wireless network adapters will connect.
  • Page 20 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 20 of 108 [in screenshot above, the “r” in router should be capitalized in “Belkin routers”] 1.4 Requesting Internet Account Info (if needed) If your Internet account requires a login and password, you will be prompted with a screen similar to the illustration below. Select your...
  • Page 21 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 21 of 108 [insert EZI_9.tif] [text in screenshot above should say, “The Router needs a bit more information in order to be able to connect to the Internet. When you tell us who provides your service, we can configure most of it:”; also header should read “Internet account info”—note the sentence casing to remain consistent with the prev.
  • Page 22 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 22 of 108 [insert EZI_11.tif] 1.6 Checking Internet Connection We are almost done. The Setup Assistant will now check your connection to the Internet.
  • Page 23 Page 23 of 108 [insert EZI_16.tif] Congratulations You have finished installing your new Belkin Router. You will see the Congratulations screen when your Router can connect to the Internet. You can begin surfing by opening your browser and going to any website.
  • Page 24 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 24 of 108 [insert EZI_done.tif] [header in screenshot above should say: Congratulations—Your Router is set up] Troubleshooting If the Setup Assistant is not able to connect to the Internet, you will see the following screen. Follow the on-screen instructions to go through the troubleshooting steps.
  • Page 25 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 25 of 108 [insert EZI_17.tif] 1.7 Optional: Assistance Connecting Other Computers This optional step will help you to connect additional wired and wireless computers to your network. Follow the on-screen instructions.
  • Page 26 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 26 of 108 [insert EZI_Opt_1.tif] [text below header in screenshot below should read: At this point, your Router is set up and working properly. It is now time to connect your other computers. Connecting computers wirelessly Computers with wireless network adapters can use this network. If you still need to install those adapters, do this now.

  • Page 27: Alternate Setup Method

    16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 27 of 108 [insert EZI_Opt_Done.tif] Alternate Setup Method Step 1: Hardware Connections – Follow the Quick Installation Guide See the QIG or Step 1: Hardware Connections from the previous section. Step 2: Set your Computer’s Network Settings to Work with a DHCP Server See the section in this User Manual called “Manually Configuring Network Settings”...
  • Page 28 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 28 of 108 You will see the Router’s home page in your browser window. The home page is visible to any user who wants to see it. To make any changes to the Router’s settings, you have to log in. Clicking the “Login” button or clicking on any one of the links on the home page will take you to the login screen.
  • Page 29 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 29 of 108 Logging out of the Router One computer at a time can log into the Router for the purposes of making changes to the settings of the Router. Once a user has logged in to make changes, there are two ways that the computer can be logged out.
  • Page 30 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 30 of 108 2. Home Button The home button is available in every page of the UI. Pressing this button will take you back to the home page. 3. Help Button The “Help” button gives you access to the Router’s help pages. Help is also available on many pages by clicking “more info”...
  • Page 31 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 31 of 108 6. Language Shows the active language for the Advanced User Interface. Select a desirable language by clicking one of the available languages. 7. Version Info Shows the firmware version, boot-code version, hardware version, and serial number of the Router.
  • Page 32 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 32 of 108 [insert WAN.tif] Setting your Connection Type From the “Connection Type” page, you can select the type of connection you use. Select the type of connection you use by clicking the button (1) next to your connection type and then clicking “Next”...
  • Page 33 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 33 of 108 Setting your Internet Service Provider (ISP) Connection Type to Dynamic IP A dynamic connection type is the most common connection type found with cable modems. Setting the connection type to “dynamic” in many cases is enough to complete the connection to your ISP.
  • Page 34 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 34 of 108 Setting your Internet Service Provider (ISP) Connection Type to Static IP A static IP address connection type is less common than other connection types. If your ISP uses static IP addressing, you will need your IP address, subnet mask, and ISP gateway address.
  • Page 35 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 35 of 108 Setting your ISP Connection Type to PPPoE Most DSL providers use PPPoE as the connection type. If you use a DSL modem to connect to the Internet, your ISP may use PPPoE to log you into the service.
  • Page 36 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 36 of 108 1. User Name This space is provided to type in your user name that was assigned by your ISP. 2. Password Type in your password and retype it into the “Retype Password” box to confirm it. 3.
  • Page 37 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 37 of 108 Setting your Internet Service Provider (ISP) Connection Type to Point-to- Point Tunneling Protocol (PPTP) [European Countries Only]. Some ISPs require a connection using PPTP protocol, a type of connection most common in European countries. This sets up a direct connection to the ISP’s system.
  • Page 38 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 38 of 108 The following becomes visible when you deselect “Get IP by DHCP”. 4. Service IP Address Provided by your ISP. Enter your service IP address here. 5. My IP Address Provided by your ISP. Enter the IP address here. 6.
  • Page 39 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 39 of 108 Setting your Connection Type if You Are a Telstra® BigPond User [Australia Only] Your user name and password are provided to you by Telstra BigPond. Enter this information below. Choosing your state from the drop-down menu (6) will automatically fill in your login server IP address.
  • Page 40 Setting Custom Domain Name Server (DNS) Settings A “Domain Name Server” is a server located on the Internet that translates Universal Resource Locaters (URLs) like “www.belkin.com” to IP addresses. Many Internet Service Providers (ISPs) do not require you to enter this information into the Router.
  • Page 41 MAC address will be “seen” by the ISP and may cause the connection not to work. Belkin has provided the ability to clone (copy) the MAC address of the computer into the Router. This MAC address, in turn, will be seen by the ISP’s system as the original MAC address and will allow the connection to work.
  • Page 42 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 42 of 108 Entering a Specific MAC Address In certain circumstances you may need a specific WAN MAC address. You can manually enter one in the “MAC Address” page. Type in a MAC address in the spaces provided (2) and click “Apply Changes” (3) to save the changes. The Router’s WAN MAC address will now be changed to the MAC address you specified.

  • Page 43: Using The Web-Based Advanced User Interface

    16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 43 of 108 Using the Web-Based Advanced User Interface Using your Internet browser, you can access the Router’s Web-Based Advanced User Interface. In your browser, type “192.168.2.1” (do not type in anything else such as “http://” or “www”) then press the “Enter” key. [use existing tif] You will see the Router’s home page in your browser window.

  • Page 44: Changing Lan Settings

    There is no need to change the subnet mask. This is a unique, advanced feature of your Belkin Router. It is possible to change the subnet mask if necessary; however, do NOT make changes to the subnet mask unless you have a specific reason to do so.

  • Page 45: Viewing The Dhcp Client List Page

    IP address to change. 6. Local Domain Name The default setting is “Belkin”. You can set a local domain name (network name) for your network. There is no need to change this setting unless you have a specific advanced need to do so. You can name the network anything you want such as “MY NETWORK”.

  • Page 46: Configuring The Wireless Network Settings

    To identify your wireless network, a name called the SSID is used. The SSID is your network name. The default network name of the Router is “Belkin N Wireless” followed by six digits that are unique to your Router. Your network name will look something like “Belkin_N_Wireless_123456”.
  • Page 47 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 47 of 108 [insert Channel and SSID.tif] Note: Please periodically check for new Router firmware updates from the “Utilities > Firmware update” page. Newer firmware can fix problems, add wireless features, and/or improve wireless performance (see page xx). [Designer, Please match page number to the firmware update section] Changing the Wireless Channel There are a number of operating channels from which you can choose—in the...
  • Page 48 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 48 of 108 Using the Wireless Mode Switch This switch allows you to set the Router’s wireless modes. There are several modes. Note: Some modes may require firmware updates to be enabled. 1) Off This mode will turn OFF the Router’s access point, so no wireless devices can join the network.
  • Page 49 802.11g or 802.11b traffic in the operating environment. Use protected mode if your network consists of a mix of Belkin N Wireless Cards and 802.11g or 802.11b cards on your network. If you are in an environment that includes little to no 802.11g or 802.11b wireless network traffic, you will achieve...
  • Page 50 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 50 of 108 Changing the Wireless Security Settings Your N Wireless Router is equipped with the latest security standard called Wi-Fi Protected Access™ 2 (WPA2™) and the legacy security standard called Wired Equivalent Privacy (WEP). Your Router also supports the Wi-Fi Protected Setup (WPS) specification, which simplifies the setup of a wireless network.
  • Page 51 IMPORTANT: You also need to ensure that all your wireless client cards/adapters support WPA2, and that you have downloaded and installed the latest driver. Most of the Belkin wireless cards have driver updates available for download from the Belkin support site: www.belkin.com/networking.

  • Page 52: Setting Wpa Security

    16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 52 of 108 2. For “Authentication”, select “WPA-PSK”, “WPA2-PSK”, or “WPA-PSK + WPA2-PSK”. This setting will have to be identical on the wireless clients that you set up. “WPA-PSK + WPA2-PSK” mode will allow the Router to support clients running either WPA or WPA2 security.

  • Page 53: Setting Wep Encryption

    16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 53 of 108 numbers, or characters. Each client uses the same key to access the network. Typically this is the mode that will be used in a home environment. Setting WPA-PSK 1. From the “Security Mode” drop-down menu, select “WPA/WPA-Personal (PSK)”.
  • Page 54 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 54 of 108 2. After selecting your WEP encryption mode, you can enter you WEP key manually by typing in the hex WEP key manually, or you can type a passphrase in the “PassPhrase” field and click “Generate” to create a WEP key from the passphrase.

  • Page 55: Using The Access Point Mode

    16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 55 of 108 [encryption chart.tif][use current image] Note to Mac users: Original Apple AirPort products support 64-bit encryption only. Apple AirPort 2 products can support 64-bit or 128-bit encryption. Please check your product to see which version you are using. If you cannot configure your network with 128-bit encryption, try 64-bit encryption.

  • Page 56: Setting Mac Address Control

    16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 56 of 108 [insert Use as AP.tif] Setting MAC Address Control The MAC address filter is a powerful security feature that allows you to specify which computers are allowed on the wireless network. Note: This list applies only to wireless computers.
  • Page 57 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 57 of 108 [insert Mac_Address.tif] Setting up an Allow Access List 1. Select the “Allow” radio button (1) to begin setting up a list of computers allowed to connect to the wireless network. 2. Next, in the “MAC Address” field that is blank (3), type in the MAC address of the wireless computer you want to be able to access the wireless network, then click “<<Add”...
  • Page 58 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 58 of 108 [Mac address control.tif]...

  • Page 59: Configuring The Firewall

    16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 59 of 108 Configuring the Firewall Your Router is equipped with a firewall that will protect your network from a wide array of common hacker attacks including: • IP Spoofing • Land Attack Ping of Death (PoD) • Denial of Service (DoS) •...
  • Page 60 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 60 of 108 [insert Firewall.tif] Configuring Internal Forwarding Settings The Virtual Servers function will allow you to route external (Internet) calls for services such as a web server (port 80), FTP server (Port 21), or other applications through your Router to your internal network. Since your internal computers are protected by a firewall, computers outside your network (over the Internet) cannot get to them because they cannot be “seen”.
  • Page 61 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 61 of 108 Setting Client IP Filters The Router can be configured to restrict access to the Internet, email, or other network services at specific days and times. Restriction can be set for a single computer, a range of computers, or multiple computers. [insert Client_IP_Filter.tif] To restrict Internet access to a single computer for example, enter the IP address of the computer you wish to restrict access to in the IP fields (1).

  • Page 62: Using Dynamic Dns

    16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 62 of 108 Enabling the Demilitarized Zone (DMZ) The DMZ feature allows you to specify one computer on your network to be placed outside of the firewall. This may be necessary if the firewall is causing problems with an application such as a game or video conferencing application. Use this feature on a temporary basis.
  • Page 63 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 63 of 108 Internet. DynDNS.org provides this service, for up to five host names, free to the Internet community. The Dynamic DNS service is ideal for a home website, file server, or to make it easy to access your home PC and stored files while you’re at work. Using the service can ensure that your host name always points to your IP address, no matter how often your ISP changes it.
  • Page 64 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 64 of 108 [insert DDNS.tif] Blocking an ICMP Ping Computer hackers use what is known as “pinging” to find potential victims on the Internet. By pinging a specific IP address and receiving a response from the IP address, a hacker can determine that something of interest might be there. The Router can be set up so it will not respond to an ICMP ping from the outside.

  • Page 65: Utilities

    16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 65 of 108 [insert WAN_Ping.tif] To turn off the ping response, select “Block ICMP Ping” (1) and click “Apply Changes”. The Router will not respond to an ICMP ping. Utilities The “Utilities” screen lets you manage different parameters of the Router and perform certain administrative functions.
  • Page 66 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 66 of 108 [insert Restart Router.tif] Restarting the Router to Restore Normal Operation 1. Click the “Restart Router” button. 2. The following message will appear. Click “OK”. 9230_Restart_Router_Confirmation.jpg[keep] 3. The following message will appear. Restarting the Router can take up to 60 seconds.
  • Page 67 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 67 of 108 Restoring Factory Default Settings Using this option will restore all of the settings in the Router to the factory (default) settings. It is recommended that you back up your settings before you restore all of the defaults. [insert restore_Factory default.tif] 1.
  • Page 68 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 68 of 108 Saving a Current Configuration You can save your current configuration by using this feature. Saving your configuration will allow you to restore it later if your settings are lost or changed. It is recommended that you back up your current configuration before performing a firmware update.
  • Page 69 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 69 of 108 2. A window will open that allows you to select the location where you want to save the configuration file. Select a location. You can name the file anything you want, or use the default name “user.conf”. Be sure to name the file so you can locate it yourself later.
  • Page 70 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 70 of 108 [insert restore_previous saved settings.tif]...
  • Page 71 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 71 of 108 1. Click “Browse”. A window will open that allows you to select the location of the configuration file. All configuration files end with a “.conf”. Locate the configuration file you want to restore and double-click on it. 9230_Restore_Saved_Settings_Choose_File.jpg[keep] 2.

  • Page 72: Updating The Firmware

    = 192.168.2.1) into the navigation bar of your browser. Updating the Firmware From time to time, Belkin may release new versions of the Router’s firmware. Firmware updates contain feature improvements and fixes to problems that may have existed. When Belkin releases new firmware, you can download the firmware from the Belkin update website and update your Router’s firmware to...
  • Page 73 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 73 of 108 version available. If a new version is available, you will have the option to download it. Downloading a New Version of Firmware If you click the “Check Firmware” button and a new version of firmware is available, you will see a screen similar to the one below:...
  • Page 74 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 74 of 108 [use Firmware Available2.tif] 1. To download the new version of firmware, click “Download”. 2. A window will open that allows you to select the location where you want to save the firmware file. Select a location. You can name the file anything you want, or use the default name.
  • Page 75 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 75 of 108 [insert firmware_update-detail.tif] 4. You will be asked if you are sure you want to continue. Click “OK”. 9230_Firmware_Update_Confirmation.jpg[keep] 5. You will see one more message. This message tells you that the Router may not respond for as long as one minute as the firmware is loaded into the Router and the Router is rebooted.
  • Page 76 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 76 of 108 6. A 60-second countdown will appear on the screen. When the countdown reaches zero, the Router firmware update will be complete. The Router home page should appear automatically. If not, type in the Router’s address (default = 192.168.2.1) into the navigation bar of your browser.
  • Page 77 Internet and get a response. You cannot set the clock yourself. [insert Time Zone.tif] Enabling Remote Management Before you enable this advanced feature of your Belkin Router, MAKE SURE YOU HAVE SET THE ADMINISTRATOR PASSWORD. Remote management allows you to make changes to your Router’s settings from anywhere on the Internet.
  • Page 78 Enabling/Disabling UPnP UPnP (Universal Plug-and-Play) is yet another advanced feature offered by your Belkin Router. It is a technology that offers seamless operation of voice messaging, video messaging, games, and other applications that are UPnP- compliant. Some applications require the Router’s firewall to be configured in a specific way to operate properly.

  • Page 79: Manually Configuring Network Settings

    16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 79 of 108 [insert Upnp.tif] Enabling/Disabling Auto Firmware Update This innovation provides the Router with the built-in capability to automatically check for a new version of firmware and alert you that the new firmware is available. When you log into the Router’s advanced interface, the Router will perform a check to see if new firmware is available.
  • Page 80 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 80 of 108 1. Pull down the Apple menu. Select “Control Panels” and select “TCP/IP”. 2. You will see the TCP/IP control panel. Select “Ethernet Built-In” or “Ethernet” in the “Connect via:” drop-down menu (1). [xxxxxxx][use current image] [keep] 3.
  • Page 81 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 81 of 108 4. If not already set, at “Configure:”, choose “Using DHCP Server”. This will tell the computer to obtain an IP address from the Router. [xxxxxxx] [use current image] [keep] 5. Close the window. If you made any changes, the following window will appear. Click “Save”.
  • Page 82 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 82 of 108 3. Select “Built-in Ethernet” (2) next to “Show” in the Network menu. [xxxxxxx] [use current image] [keep] 4. Select the “TCP/IP” tab (3). Next to “Configure” (4), you should see “Manually” or “Using DHCP”. If you do not, check the PPPoE tab (5) to make sure that “Connect using PPPoE”...
  • Page 83 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 83 of 108 Manually Configuring Network Settings in Windows 2000, NT, or XP 1. Click “Start”, “Settings”, then “Control Panel”. 2. Double-click on the “Network and dial-up connections” icon (Windows 2000) or the “Network” icon (Windows XP). 3. Right-click on the “Local Area Connection” associated with your network adapter and select “Properties”...
  • Page 84 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 84 of 108 4. In the “Local Area Connection Properties” window, click “Internet Protocol (TCP/IP)” and click the “Properties” button. The following screen will appear: [XP TCPIP.tif] [use current image] [keep] 5. If “Use the following IP address” (2) is selected, your Router will need to be set up for a static IP connection type.
  • Page 85 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 85 of 108 Manually Configuring Network Settings in Windows 98 or Me 1. Right-click on “My Network Neighborhood” and select “Properties” from the drop-down menu. 2. Select “TCP/IP -> settings” for your installed network adapter. You will see the following window.
  • Page 86 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 86 of 108 [win2k settings chart.tif] [keep] [use current image] 7. If not already selected, select “Obtain IP address automatically” on the IP address tab. Click “OK”. Restart the computer. When the computer restarts, your network settings are now configured for use with the Router.

  • Page 87: Recommended Web Browser Settings

    16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 87 of 108 Recommended Web Browser Settings In most cases, you will not need to make any changes to your web browser’s settings. If you are having trouble accessing the Internet or the Web-Based Advanced User Interface, then change your browser’s settings to the recommended settings in this section.
  • Page 88 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 88 of 108 [IE6_Internet_Optio ns_Connections.jpg 3. Under the “Internet Options” screen, click on “Connections” and select “LAN Settings…”.
  • Page 89 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 89 of 108 4. Make sure there are no check marks next to any of the displayed options: “Automatically detect settings”, “Use automatic configuration script”, and “Use a proxy server”. Click “OK”. Then click “OK” again in the “Internet Options” page.

  • Page 90: Troubleshooting

    16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 90 of 108 Troubleshooting Setup Assistant CD does not automatically start. If the CD-ROM does not start the Setup Assistant automatically, it could be that the computer is running other applications that are interfering with the CD drive. 1.
  • Page 91 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 91 of 108 Setup Assistant cannot find my Router. If the Setup Assistant is not able to find the Router during the installation process, please check the following items: 1. If the Setup Assistant is not able to find the Router during the installation process, there may be third-party firewall software installed on the computer attempting to access the Internet.
  • Page 92 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 92 of 108 Setup Assistant cannot connect my Router to the Internet. If the Setup Assistant is not able to connect the Router to the Internet, please check the following items: 1. Use the troubleshooting suggestions within the Setup Assistant. 2.
  • Page 93 This will cause the Router to reattempt communication with the modem. If the “modem” LED on the Router is not lit after completing these steps, please contact Belkin Technical Support. 4. Try shutting down and restarting your computer. • The Setup Assistant completed installation, but my web browser doesn’t work.
  • Page 94 If you are unable to connect to the Internet from a wireless computer, please check the following items: 1. Look at the lights on your Router. If you’re using a Belkin Router, the lights should be as follows: • The “router” LED should be on.
  • Page 95 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 95 of 108 2. Open your wireless utility software by clicking on the icon in the system tray at the bottom, right-hand corner of the screen. 3. The exact window that opens will vary depending on the model of wireless card you have;...
  • Page 96 Router’s wireless “Channel and SSID” configuration page. If you are still unable to access the Internet after completing these steps, please contact Belkin Technical Support. • My wireless network performance is inconsistent. • Data transfer is sometimes slow.
  • Page 97 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 97 of 108 Changing the wireless channel—Depending on local wireless traffic and interference, switching the wireless channel of your network can improve performance and reliability. The default channel the Router is shipped with is channel 11; you may choose from several other channels depending on your region.
  • Page 98 128-bit encryption, try 64-bit encryption. I am having difficulty setting up Wired Equivalent Privacy (WEP) security on a Belkin client card. The client card must use the same key as the Router. For instance, if your Router uses the key 00112233445566778899AABBCC, then the client card must be set to the exact same key.
  • Page 99 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 99 of 108 3. Once the “Advanced” button is clicked, the Belkin Wireless LAN Utility will appear. This Utility will allow you to manage all the advanced features of the Belkin Wireless Card. 4. Under the “Wireless Network Properties” tab, select a network name from the “Available Networks”...
  • Page 100 2. Once the “Advanced” button is clicked, the Belkin Wireless Utility will appear. This Utility will allow you to manage all the advanced features of the Belkin Wireless Card. 3. Under the “Wireless Network Properties” tab, select a network name from the “Available Networks”...
  • Page 101 16030_P75445-A_F5D8233-4_V3000_N_RTR_MNL_961008.doc Page 101 of 108 I am NOT using a Belkin client card for a home network and I am having difficulty setting up Wireless Protected Access (WPA) security. If you are not using a Belkin Wireless Desktop or Wireless Notebook Network Card that is not equipped with WPA-enabled software, a file from Microsoft called “Windows XP Support Patch for Wireless Protected Access”...
  • Page 102 802.11g, can transmit information up to 54Mbps; 802.11a also supports up to 54Mbps, but in the 5GHz frequency; and 802.11n draft specification can connect at up to 300Mbps. See the following chart for more detailed information. Belkin Wireless Comparison Chart Wireless G Plus N MIMO...

  • Page 103: Information

    802.11n specifications and may require a software upgrade for best results. Technical Support You can find technical support information at http://www.belkin.com/networking or www.belkin.com through the tech support area. If you want to contact technical support by phone, please call: US: 877-736-5771 800-223-5546 ext.
  • Page 104 Modifications The FCC requires the user to be notified that any changes or modifications to this device that are not expressly approved by Belkin International, Inc., may void the user’s authority to operate the equipment. Canada-Industry Canada (IC) The wireless radio of this device complies with RSS 210 Industry Canada.
  • Page 105 • EN 300 328 Technical requirement for radio equipment • ETS 301 489 General EMC requirements for radio equipment. To determine the type of transmitter, check the identification label on your Belkin product. Products with the CE marking comply with the EMC Directive (89/336/EEC) and the Low Voltage Directive (72/23/EEC) issued by the Commission of the European Community.
  • Page 106 (except for shipping charges for the product). What is not covered by this warranty? All above warranties are null and void if the Belkin product is not provided to Belkin for inspection upon Belkin’s request at the sole expense of the purchaser, or if Belkin determines that the Belkin product has been improperly installed, altered in any way, or tampered with.
  • Page 107 Page 107 of 108 equipment must remain available for inspection until the claim is finalized. Whenever claims are settled, Belkin reserves the right to be subrogated under any existing insurance policies the purchaser may have. How state law relates to the warranty.
  • Page 108 +61 (0) 2 4350 4600 +61 (0) 2 4350 4700 fax © 2007 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. Mac, Mac OS, Apple, and AirPort are trademarks of Apple Inc., registered in the U.S. and other countries.

This manual is also suitable for:

N

Table of Contents