Table of Contents
Advertisement
English
22
Meaning of error codes
Error code
1
3 - 4
5
Other error codes
Troubleshooting
Problem
- There is too much powder in the brew group. Clean the brew group.
- If an error code is triggered, check the section 'Meaning of error codes' to
see what the code on the display means and what you can do. The
machine cannot be used when this icon is on the display.
- You forgot to place the lid on the pre-ground coffee compartment. If you
do not place it back within 30 seconds the display will return to the main
menu and the brewing cycle will be stopped.
Problem
Coffee grinder blocked
The brew group cannot
be removed.
Water circuit problem
If the above solutions do not help to remove the error code icon from the
display and bring the machine back to normal working order, contact the
Philips Saeco hotline. Contact details can be found in the warranty booklet
or on www.saeco.com/support.
Cause
Cause
Coffee exit duct
clogged
The brew group is not
positioned correctly.
There is air in the water
circuit.
Solution
Possible solution
Clean the coffee exit
duct thoroughly with
the handle of the
multifunctional tool or a
spoon handle.
Close the maintenance
door. Switch the
machine off and back
on again. Wait for the
'machine ready' icon on
the display and then
remove the brew group.
Remove and place back
the water tank a couple
of times. Make sure you
insert it into the
machine properly.
Check if the water tank
compartment is clean.
Switch the machine off
and switch it back on
again after 30 seconds.
Try this 2 or 3 times.
Advertisement
Table of Contents
