Table of Contents
Advertisement
Descaling
CALC CLEAN
Descaling procedure
CALC
CLEAN
1 Remove the automatic milk frother from the steam wand.
2 Place a container under the steam wand.
3 Press the HOT WATER button. Hot water dispensing starts automatically.
4 Press the OK button to stop hot water dispensing. Remove the container.
You have to descale the machine when the display shows the CALC CLEAN
icon.
If you do not descale when the display shows the CALC CLEAN icon, the
machine may stop working properly. In this case, repairs are not covered by
the warranty.
Never drink the water with descaling mixture that you pour into
the water tank or any water with residues that comes out of the
machine during the descaling procedure.
The descaling procedure lasts approximately 30 minutes. Only use the
Saeco descaling solution to descale the machine. The Saeco descaling
solution is designed to ensure optimal performance of the machine.
You can pause the descaling or rinsing cycle by pressing the ESC button.
The display will show the following icon. To continue the descaling or rinsing
cycle, press the OK button.
1 Remove and empty the drip tray. Slide the drip tray back into the
machine.
2 Remove the water filter from the water tank (if present).
3 Remove the automatic milk frother from the steam wand.
4 Press the OK button.
English
15
Advertisement
Table of Contents
