Table of Contents
Advertisement
Brewing coffee with pre-ground coffee
Adjusting the coffee quantity
Adjusting the grind setting
Frothing milk
When you brew coffee with pre-ground coffee, use the measuring scoop in
the multifunctional tool supplied to put the correct dose in the pre-ground
coffee compartment. If you add more pre-ground coffee, the excess coffee
will end up in the coffee grounds drawer.
1 Open the lid of the pre-ground coffee compartment.
2 Pour one measuring scoop of pre-ground coffee into the compartment.
Caution: Do not put any other substance than pre-ground coffee in the
pre-ground coffee compartment, as this may damage the machine.
3 Place the lid back on the pre-ground coffee compartment.
4 Place a cup under the coffee dispensing spout.
5 Press the AROMA STRENGTH button to select pre-ground coffee.
-
The machine automatically starts brewing coffee.
Note: You can only brew one coffee beverage at a time with pre-ground
coffee.
1 Press and hold the ESPRESSO button or ESPRESSO LUNGO button until
the display shows the word MEMO.
2 When the cup contains the desired amount of coffee, press the OK
button to save the selected quantity.
1 Open the coffee bean hopper.
2 Place the end of the measuring spoon handle on the grinder adjustment
knob in the coffee bean hopper. Use the spoon to press and turn the
knob to the left or to the right one notch a time.
3 There are 10 different grinding degree settings you can choose from. The
smaller the dot, the stronger the coffee.
- Coarse grind: lighter taste, for dark roasted coffee blends.
- Fine grind: bolder taste, for light roasted coffee blends.
4 Place the coffee bean hopper back.
5 Brew 2-3 coffees to taste the difference.
Warning: Danger of scalding. Only grab the steam wand by its
protective handle. Dispensing may be preceded by small jets of
hot water.
English
13
Advertisement
Table of Contents
