10
xx
Meaning of error codes
Error code
1
3 - 4
.
5
14
- If the display shows an error code, check section 'Meaning of the error
codes' to see what the code on the display means and what you can do.
The machine cannot be used when this icon is on the display.
- The lid of the bean hopper is open. Close the lid of the bean hopper.
Problem
The coffee grinder is
blocked.
There is a problem with
the brew group.
There is a water circuit
problem.
The machine is
overheated.
If the above solutions do not help to remove the error code icon from the
display and bring the machine back to normal working order, contact the
Philips Saeco hotline. Contact details can be found in the warranty booklet
or on www.saeco.com/support.
Cause
The coffee exit duct is
clogged.
The brew group is dirty.
The brew group is not
positioned correctly.
There is air in the water
circuit.
This can have several
causes.
English
25
Possible solution
Clean the coffee exit
duct thoroughly with
the handle of the
multifunctional tool or a
spoon handle.
Remove the brew group
and thoroughly.
Remove the brew group
and reinsert it. Before
you slide it back into
the machine, make sure
the two reference signs
on the side match.
Remove and place back
the water tank a couple
of times. Make sure you
insert it into the
machine properly.
Check if the water tank
compartment is clean.
Turn the machine off
and turn it back on
again after 30 minutes.
Try this 2 or 3 times.