Table of Contents
Advertisement
English
18
Lubrication
Automatic milk frother cleaning (daily)
Automatic milk frother cleaning (monthly)
7 The hook is not correctly positioned if it is still in bottommost position.
8 Slide the brew group back into the machine along the guiding rails on the
sides until it clicks into position. Then place the coffee residues drawer
back in the machine.
Lubricate the brew group after approximately 500 cups of coffee or once a
month.
1 Apply some lubricant around the shaft in the bottom of the brewing unit.
2 Apply lubricant to the rails on both sides, as shown in the illustration.
3 Slide the brew group back into the machine along the guiding rails on the
sides until it clicks into position. Then place the coffee residues drawer
back in the machine.
1 Plunge the suction tube into a pitcher filled with fresh water.
2 Place an empty container under the automatic milk frother. Press the
MILK FROTH button.
3 When the water that flows out of the automatic milk frother is clean,
press the ESC button to stop the dispensing.
1 Pour the contents of a Saeco milk circuit cleaning sachet into a pitcher.
Add a half litre of water.
2 Insert the suction tube into the pitcher.
3 Place a container under the automatic milk frother.
4 Press the MILK FROTH button.
5 You can press OK to stop or let the machine dispense until it stops
automatically.
Advertisement
Table of Contents
