Table of Contents
Advertisement
Installing the water filter
WATER
FILTER
ON
OFF
Replacing the water filter
ON
OFF
RESET
1 Remove the small white filter from the water tank and store it in a dry
place.
Note: Please keep the small white filter for future use.You will need it for
the descaling process.
2 Remove the filter from its packaging and immerse it in cold water with the
opening pointing upwards. Press the sides of the filter gently to let out
the air bubbles.
3 Place the filter in the empty water tank. Press it down until it cannot
move any further.
4 Fill the water tank with fresh water up to the MAX indication and place it
the machine.
5 Select the hot water function and dispense hot water until the water tank
is empty (see chapter 'Using the machine', section 'Brewing special
drinks').
6 Refill the water tank with fresh water up to the MAX indication and place
it back into the machine.
7 Press the MENU button to enter the menu.
8 Press the DOWN button until the display shows the following icon.
9 Press the UP button to select 'ON' and press the OK button to confirm.
10 Press the ESC button.
The filter and machine are now ready for use.
- The display shows the following icon to indicate the water filter needs to
be replaced.
1 Replace the filter as described in section 'Installing the water filter'.
2 Press the MENU button and press the UP/DOWN button to scroll trough
the options on the menu until the following icon is displayed.
3 Select the RESET option and press the OK button to confirm.
4 Press the ESC button to exit.
If the filter is already installed and you want to remove it and not replace it,
choose OFF
English
11
Advertisement
Table of Contents
