Manual Rinsing Cycle; Hot Water Circuit Rinsing; Coffee Brewing Circuit Rinsing; Intenza+ Water Filter - Saeco Incanto HD8911/47 Manual

English
10

Manual rinsing cycle

HOT WATER
HOT
WATER
AROMA STRENGTH
GROUND COFFEE

Intenza+ water filter

During the manual rinsing cycle, fresh water flows through the water and
coffee brewing circuit. This takes a few minutes.

Hot water circuit rinsing

1 Place a container under the classic milk frother.
2 Press the HOT WATER button.
-
The machine starts dispensing hot water.
Note: To interrupt the rinsing cycle, press the OK button.
3 When the machine has dispensed 2 cups of hot water (0.5 l), press the
OK button to stop the hot water dispensing. Repeat steps 1 to 3 twice.

Coffee brewing circuit rinsing

1 Place a container under the coffee dispensing spout.
2 Press the AROMA STRENGTH button and select the pre-ground coffee
brewing function.
Note: Do not add pre-ground coffee in the pre-ground coffee
compartment.
3 Press the ESPRESSO LUNGO button.
-
The machine starts dispensing water from the coffee dispensing
spout.
4 Wait until the machine stops dispensing water and empty the container.
5 Repeat steps 1 to 4 twice.
6 When the machine has returned to the main menu, empty the container.
The machine is ready for use.
We advise you to install the Intenza+ water filter to reduce limescale
deposits in your coffee machine and to provide filtered water for preserving
the aroma and flavor of each cup of coffee.

Installing the Intenza+ water filter

Note: Always confirm activation of the Intenza+ water filter in the machine
menu as described below. By activating the Intenza+ water filter in the
machine menu, the machine indicates when you need to replace the filter.
1 Remove the small white filter from the water tank and store it in a dry
place.
Note: Please keep the small white filter for future use. You will need it for
the descaling process.