Installing The Intenza Water Filter (Optional); Filtre À Eau Intenza (En Option) - Saeco RI9752/01 Operating And Maintenance Manual

Saeco odea ri9752/01
Table of Contents

Advertisement

INTENZA WATER FILTER (OPTIONAL)
12
FILTRE À EAU INTENZA (EN OPTION)
WATER FILTER (OPTIONAL) - FILTRE A EAU INTENZA (EN OPTION)
To improve the quality of the water used, it is recommended to install the water fi lter.
Remove the water fi lter from its packaging, immerse it vertically (with the opening facing
upwards) in cold water and gently press the sides so as to let the air bubbles out.
Afi n d'améliorer la qualité de l'eau utilisée, il est conseillé d' installer le fi ltre à eau.
Enlever le fi ltre de son emballage, ensuite le plonger verticalement dans l'eau froide (l'ouverture
vers le haut). Pousser le fi ltre délicatement sur les bords pour faire sortir toute bulle d'air.
1
Remove the small white fi lter from
the water tank and store it in a dry
place sheltered from dust.
Enlever le petit fi ltre blanc
à l'intérieur du réservoir, le
conserver dans un endroit sec et
le protéger contre la poussière.
4
Fill the water tank with fresh
drinking water and re-insert it
into the machine.
Remplir le réservoir avec
de l'eau fraîche potable et
repositionner celui-ci dans la
machine.
NOTE: if the Intenza water fi lter is not used, insert the small white fi lter that was previously removed (step 1) into the
water tank.
REMARQUE : Si le fi ltre à eau Intenza n'est pas présent, insérer dans le réservoir le petit fi ltre blanc précédemment enlevé.
2
Set the Intenza Aroma System:
A = Soft water
B = Medium water (standard)
C = Hard water
Régler Intenza Aroma System :
A = Eau légère
B = Eau moyennement dure
(standard)
C = Eau dure
5
Place a container beneath the
steam wand. Dispense the water
in the tank using the hot water
function (see page 20).
Placer un récipient sous la
buse de vapeur. Distribuer l'eau
chaude se trouvant dans le
réservoir au moyen de la fonction
eau chaude (voir page 20).
3
Insert the fi lter in the empty tank.
The reference mark and the
groove must match. Push fi rmly
until it is completely inserted.
Insérer le fi ltre dans le réservoir
vide ; le point de repère et la
cannelure doivent coïncider.
Appuyer jusqu'au point d'arrêt.
6
Fill the tank again with fresh
drinking water.
The machine is ready for use.
Remplir de nouveau le réservoir
avec de l'eau potable fraîche.
La machine est prête.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ri9752/31Ri9752/47Ri9752/48Odea go sup031o

Table of Contents