Platform Overload Components; Platform Overload System (If Equipped); How To Calibrate The Platform Overload System (If Equipped) - Terex Genie GS84D-401 Service And Repair Manual

Service and Repair Manual

Platform Overload Components

12-1
Platform Overload System (if
equipped)
How to Calibrate the Platform

How to Calibrate the Platform Overload System (if equipped)

Overload System
Machines with platform overload systems, proper
calibration is essential to safe machine operation.
An improperly calibrated platform overload system
could result in the system failing to sense an
overloaded platform. The stability of the machine
is compromised and it could tip over.
Note: Perform this procedure with the machine on
a firm, level surface with all weight, tools and
equipment removed from the platform.
Note: Perform this procedure in an area that is free
of overhead obstructions.
Models with outriggers: Fully lower the
1
outriggers and level the machine.
2 Using a suitable lifting device, place and
secure the maximum rated load in the center
of the platform deck.
Model
GS-3384, GS-3390
GS-4390, GS-5390
3 Turn the key switch to ground control and pull
out the red Emergency Stop button to the on
position at the platform controls.
108
Maximum rated load
2500 lbs
1134 kg
1500 lbs
681 kg
GS ™ -84 • GS
4 Pull out the red Emergency Stop button at the
ground controls and momentarily activate the
calibration toggle switch in the up position
3 times.
Result: The red LED is on and the LCD
screen displays LOAD.
1 calibration toggle switch
2 LCD screen
3 red LED
™ -90
June 2021
Part No. 1306587GT