I
1-4
nstallatIon
MERCHANDISER LEVELING
B
e sure to position merchandisers properly
Level the merchandiser by all four corners.
Merchandiser(s) must be installed level to
ensure proper operation of the refrigeration
system, and to ensure proper drainage of
defrost water.
SERIAL PLATE LOCATION
The serial plate is located on the inside of the
merchandiser's display area as shown below.
Serial Plate
P/N 0562873_M
REFRIGERATION UNIT ACCESS
.
The rear front panel may be removed by
lifting the panel straight upward and over the
tabs on which it is hanging. Screws will have
to be removed from either end of the panel.
The panel is installed by reversing the above pro-
cedure. Ensure lower front panel is flat against
the floor when installed to prevent air circula-
tion problems.
U.S. & Canada 1-800-922-1919 • Mexico 1-800-890-2900 • www.hussmann.com
Remove Rear
Panel