I
1-4
nstallatIon
MERCHANDISER LEVELING
B
e sure to position merchandisers properly
Level the merchandiser by all four corners.
Merchandiser(s) must be installed level to
ensure proper operation of the refrigeration
system, and to ensure proper drainage of
defrost water.
SERIAL PLATE LOCATION
The serial plate is located on the inside of the
merchandiser's display area as shown below.
P/N 3086837_C
REFRIGERATION UNIT ACCESS
.
The rear panel may be removed by lifting the
panel straight upward and over the tabs on
which it is hanging. Screws will have to be
removed from either end of the panel. The
panel is installed by reversing the above procedure.
Ensure lower front panel is flat against the
floor when installed to prevent air circulation
problems.
U.S. & Canada 1-800-922-1919 • Mexico 1-800-890-2900 • www.hussmann.com