Table of Contents
Advertisement
M
4-4
aIntEnancE
NEVER USE SHARP OBJECTS AROUND
COILS. Use a soft brush or vacuum brush to
clean debris from coils. Do not puncture coils!
Do not bend fins. Contact an authorized
service technician if a coil is punctured,
cracked, or otherwise damaged.
ICE in or on the coil indicates the refrigera-
tion and defrost cycle is not operating prop-
erly. Contact an authorized service technician
to determine the cause of icing, and to make
adjustments as necessary. To maintain product
integrity, move all product to a cooler until
the unit has returned to normal operating
temperatures.
Evaporation Pan is Hot!
and poses risk of bodily injury
and protective eye wear when servicing. Turn off
evaporation pan heater, and allow pan to cool.
P/N 0562873_M
–
Always Wear gloves
U.S. & Canada 1-800-922-1919 • Mexico 1-800-890-2900 • www.hussmann.com
CLEANING EVAPORATION PAN
(SELF CONTAINED ONLY)
The condensate water outlet for self
contained models empties into a limited
capacity evaporation pan.
Debris or dirt accumulation inside the conden-
sate evaporation pan or on the heater coil will
reduce the pan's evaporation capacity and
cause premature heater failure. The evaporation
pan waste water will overflow and spill onto the
floor if the heater is not properly operating.
Remove accumulated debris from the evapora-
tion pan. Wipe down heater coil with a cloth
and warm water. Be sure to remove any dirt,
debris or liquids from the heater coil.
Water introduced during cleaning will cause
the evaporation pan to overflow.
Advertisement
Table of Contents
