Grizzly G0623X Owner's Manual page 33

37. Use straightedge to make sure splitter/riving
knife and scoring blade are aligned with main
blade. Alignment should be with blade bod-
ies, not the carbide teeth.
—Splitter/riving knife position can be changed
by adjusting set screws at splitter/riving
knife mounting block. Refer to Page 76 for
more details.
—Scoring blade alignment can be changed
by adjusting set screws accessible through
table top (see Figure 41).
Scoring Blade
Alignment
Scoring Blade Elevation
Figure 41. Access holes for scoring blade
adjustment controls.
Model G0623X/G0623X3 (Mfd. Since 05/22)
Scoring Controls Lock
38. Install blade guard on splitter/riving knife, as
shown in Figure 42, with M10-1.5 x 25 cap
screw and M10-1.5 lock nut shipped in blade
guard assembly. (Blade guard/dust hood
MUST be installed.)
Figure 42. Blade guard installed.
39. Assemble miter gauge and push handle as
shown in Figure 43.
Push Handle
Figure 43. Miter gauge and push handle
installed.
Miter Gauge
-31-