Preventative Maintenance - Horizon Fitness 7.0AT-03 Service Manual

P M
REVENTIVE

Preventative Maintenance

Preventative Maintenance
Preventative maintenance is the key to smoothly operating equipment, as well as keeping the user's
liability to a minimum. Equipment needs to be inspected at regular intervals. Defective components
must be replaced immediately. Improperly working equipment must be kept out of use until it is
repaired. Ensure that any person(s) making adjustments or performing maintenance or repair of any
kind is qualified to do so.
Every Day (Daily)
Clean and inspect, following these steps:
 Turn off the treadmill with the ON / OFF switch, then unplug the power cord at the wall outlet.
 Wipe down the running belt, deck, motor cover, and console casing with a damp cloth. Never
use solvents, as they can cause damage to the treadmill.
 Inspect the power cord. If the power cord is damaged, stop using and contact Customer
Technical Support.
 Make sure the power cord is not underneath the treadmill or in any other area where it can
become pinched or cut.
 Check the tension and alignment of the running belt. Make sure that the treadmill belt will not
damage any other components on the treadmill by being misaligned.
 If any labels are damaged or illegible, contact Customer Technical Support for replacements.
Every Week (Weekly)
Clean underneath the treadmill following these steps:
 Turn off the treadmill with the ON / OFF switch, then unplug the power cord at the wall outlet.
 Fold the treadmill into the upright position, making sure that the lock latch is secured.
 Move the treadmill to a remote location.
 Wipe or vacuum any dust particles or other objects that may have accumulated underneath the
treadmill.
 Return the treadmill to its previous position
Every Month – Important!
 Turn off the treadmill with the ON / OFF switch, then unplug the power cord at the wall outlet.
 Inspect all assembly bolts of the machine for proper tightness.
 Remove the motor cover. Wait for ALL display screens to be off.
 Clean the motor and lower board area to eliminate any lint or dust particles that may have
accumulated. Failure to do so may result in premature failure of key electrical components.
 Vacuum and wipe down the belt with a damp cloth. Vacuum any black / white particles that may
accumulate around the unit. These particles may accumulate from normal treadmill use.
7.0AT-03
AINTENANCE
6
Table of Contents
Service Manual