10.PROBLEM: At higher incline levels, a message reading "Speed Range Error – Ending Workout" ap-
pears.
SOLUTION:
▓ This is a safety feature that automatically cuts power to the drive motor when the speed is out of range
due to the combination of the load on the belt and high degree of incline .
▓ To prevent an automatic end to your workout, reduce the incline level percentage.
4.6 MAINTENANCE SCHEDULE
Preventative maintenance is the key to smooth operating equipment, as well as keeping the users' liabil-
ity to a minimum. Equipment needs to be inspected at regular intervals. Defective components must be
replaced immediately. Improperly working equipment must be kept out of use until it is repaired. Ensure
that any person making adjustments or performing maintenance or repair of any kind is qualified to do so.
WARNING
To remove power from the treadmill, the power cord must be disconnected from the wall outlet.
MAINTENANCE SCHEDULE
ACTION
Clean and inspect the treadmill:
Turn off the treadmill with the ON/OFF switch, then unplug the power cord at the wall
outlet.
Wipe down the running belt, deck, motor cover and console casing with a damp
▓
cloth. Never use solvents, as they can cause damage to the treadmill.
Inspect the power cord. If the power cord is damaged, please reference contact
▓
information on the back cover of the INFORMATION CARD for assistance.
Make sure the power cord is not underneath the treadmill or in any other area where
▓
it can become pinched or cut during storage or use.
Check the tension and alignment of the running belt. Make sure that the treadmill
▓
belt will not damage any other components on the treadmill by being misaligned.
If any labels are damaged or illegible, please reference contact information on the
▓
back cover of the INFORMATION CARD for assistance.
CHAPTER 4 Basic Machine Maintain
FREQUENCY
DAILY
22