Software Update Procedure Usb - Graco Reactor 3 Repair And Parts Manual

Repair
Software Update Procedure
USB
1. Download the latest software into the top directory
of a USB drive. The software can be downloaded
from help.graco.com.
2. Follow Shutdown on page 20 or turn off main
disconnect switch. Insert the USB, then close the
enclosure door. Turn on main disconnect switch.
ti41079a
3. The home screen will load and show the USB icon
in the top right corner.
46
4. After the .GTI file has downloaded to the Reactor, a
prompt will appear asking to apply the update on
the next power cycle.
5. Press the check mark and wait for the on-screen
prompt to prepare the Reactor for the update on
the next power cycle.
6. After step 5 is complete, the home screen will show
a circle with arrows in the right corner of the menu
bar. This indicates that the software will be updated
on the next power cycle.
7. Cycle the power by turning the disconnect switch
off then back on. Wait for the update to complete.
Confirm the software update is complete by
pressing the check mark.
8. The Software Update Complete screen will appear.
Use the QR code displayed on screen to access
the software release notes. Otherwise, press the
check mark to return to the home screen. Follow
Shutdown on page 20 or turn off main disconnect
switch, remove the USB, then close the enclosure
door. Turn on the main disconnect switch to
continue operation.
3A8501A