Replace Power Supply; Replace Surge Protector - Graco Reactor 3 Repair And Parts Manual

Replace Power Supply

1. Follow Shutdown on page 20.
2. Disconnect input and output cables from both
sides of the power supply. See Electrical
Schematics on page 69.
3. Insert a flathead screwdriver in the mounting tab on
the power supply to remove from the din rail.
4. Install new power supply (706) in reverse order.
3A8501A

Replace Surge Protector

1. Follow Shutdown on page 20.
2. Loosen connections on terminals 1 and 3 on CB3.
3. Loosen connections on input to power supply (706)
4. Remove two screws (510) and the surge protector
5. Install the new surge protector (AAF) in reverse
706
ti40202a
See Electrical Schematics on page 69.
on N and L connections. See Electrical
Schematics on page 69.
(AAF) from the enclosure.
order.
AAF
510
Repair
ti40203a
43