Lexmark CX930 User Manual page 232

Use printer menus
Menu item
Sides
Off*
Long Edge
Short Edge
File Name
Note: An asterisk (*) next to a value indicates the factory default setting.
Advanced Imaging
Menu item
Color Balance
Cyan (0*)
Magenta (0*)
Yellow (0*)
Color Dropout
Color Dropout (None*)
Default Red Threshold (128*)
Default Green Threshold (128*)
Default Blue Threshold (128*)
Auto Color Detect
Color Sensitivity (5*)
Area Sensitivity (5*)
FTP Bit Depth (1 bit*)
Minimum Scan Resolution (300 dpi*)
JPEG Quality
Best for content*
5–95
Contrast
Best for content*
0
1
2
3
4
5
Background Removal
Background Detection (Content‑based*)
Level (0*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Specify the orientation when scanning on both sides of the document.
Specify the file name of the scanned image.
Description
Adjust the color intensity for cyan, magenta, and yellow.
Specify which color to drop during scanning, and adjust the dropout
setting for that color.
Configure the auto color detection setting.
Set the JPEG quality of the scanned image.
Specify the contrast for the scanned image.
Remove the background color or image noise from the original
document.
Notes:
•
Content-based removes the background color from the original
document .
•
Fixed removes image noise from a photo.
232