Table of Contents
Advertisement
Use printer menus
Fax Receive Settings
Menu item
Fax Job Waiting
None*
Toner
Toner and Supplies
Rings to Answer
1–25 (3*)
Auto Reduction
On*
Off
Paper Source
Tray [X]
Auto*
Sides
On
Off*
Separator Sheets
None*
Before Job
After Job
Separator Sheet Source
Tray [X] (1*)
Output Bin
Standard Bin
Fax Footer
On
Off*
Fax Footer Time Stamp
Receive*
Print
Punch
Off*
2 holes
3 holes
4 holes
Staple
Off*
1 staple
2 staples
4 staples
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Remove fax jobs that request specific unavailable resources from the print
queue.
Set the number of rings before the device answers incoming calls.
Scale incoming fax to fit on the page.
Set the paper source for printing incoming fax.
Print on both sides of the paper.
Specify whether to insert blank separator sheets when printing.
Specify the paper source for the separator sheet.
Specify the output bin for received faxes.
Print the transmission information at the bottom of each page from a received
fax.
Print the time stamp at the bottom of each page from a received fax.
Specify the hole punch function for incoming faxes.
Note: This menu item appears only when a staple, hole punch finisher is
installed.
Specify the staple function for incoming faxes.
Note: This menu item appears only when a staple finisher is installed.
214
Advertisement
Table of Contents
