Table of Contents
Advertisement
Use printer menus
Menu item
Printer Emulations
Emulator Security
Reset Emulator After Job
Off*
On
Printer Emulations
Emulator Security
Disable Printer Message Access
Off
On*
Fax Configuration
Fax Low Power Support
Disable Sleep
Permit Sleep
Auto*
Fax Configuration
Fax Storage Location
NAND
Disk*
Print Configuration
Black Only Mode
Off*
On
Print Configuration
Color Trapping
Off
1
2*
3
4
5
Print Configuration
Font Sharpening
0–150 (24*)
Device Operations
Quiet Mode
Off*
On
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Reset the emulator after a print job.
Disable access to printer message during emulation.
Set fax to enter Sleep mode whenever the printer determines
that it must.
Set the storage location for all faxes.
Note: This menu item appears only when a hard disk or an
ISD is installed.
Print non‑copy jobs in grayscale.
Enhance the printed output to compensate for misregistration
in the printer.
Set a text point-size value below which the high‑frequency
screens are used when printing font data.
For example, if the value is 24, then all fonts sized 24 points or
less use the high‑frequency screens.
Set the printer to operate in Quiet Mode.
Note: Enabling this setting slows down the overall
performance of the printer.
188
Advertisement
Table of Contents
