Selecting A Tone (Patch) - Roland JD-08 Owner's Manual

Selecting a Tone (Patch)

The settings for each tone are stored in a block of memory called a "patch." By selecting (switching between) patches, you can use
a variety of sounds.
The patches are further organized by group (A–D), bank (1–8) and number (1–8), letting you save a total of 4 x 8 x 8 = 256 patches.
1. Press the NUMBER [1]–[8] buttons.
This selects the patch.
●
You can use the [VALUE] knob to select from all of the patches in order.
●
You can select separate patches for parts A and B. For details on the part settings, refer to
Selecting a Tone (Patch)
"Part Settings (p. 42)."
15