Configuring The Settings Of This Unit - Roland JD-08 Owner's Manual

Configuring the Settings of This Unit

This shows you how to configure the settings that apply to the entire unit, such as part settings, system settings and so on.
When both the [COMMON] and [EFFECT] buttons are lit, press both buttons at the same time to make their LEDs go dark (this
turns STEP SEQ off).
1. Press the [COMMON] button.
The [COMMON] button lights up.
2. Use the [VALUE] knob to select the parameter to set, and press the [VALUE] knob.
The parameter setting screen appears.
3. Turn the [VALUE] knob to set the value, and press the [VALUE] knob.
4. When you are finished making the settings, press the [EXIT] button.
Step buttons Indication
PArt
[1]
LAYr
[2]
LFO
[3]
ľG
[4]
Enu
[5]
RAnG
[6]
EQ
[7]
KEY
[8]
NiDi
[9]
SYS
[10]
UTiL
[11]
You can also press a corresponding step button to select the parameter items.
Explanation
Configures the settings for the selected part.
"Part Settings (p. 42)"
Configures the settings for the selected layer.
"Configuring the Layer Settings
Configures the LFO-related settings for the selected layer.
"Configuring the LFO (p. 44)"
Configures the WG-related settings for the selected layer.
"Configuring the WG (Waveform Generator)
Configures the envelope-related settings for the selected layer.
"Configuring the ENV (Envelope)
Configures the range-related settings for the selected part.
"Setting the Tone Key Range
Configures the EQ settings for the selected part.
"Configuring the EQ (Equalizer)
Configures the keyboard settings.
"Keyboard Settings (p. 49)"
Configures the MIDI-related settings.
"MIDI Settings (p. 50)"
Configures the system settings.
"System Settings (p. 51)"
Select this to use the utilities.
"Using the Utilities (p. 52)"
(p. 43)"
(p. 45)"
(p. 46)"
(p. 47)"
(p. 48)"
Configuring the Settings of This Unit
41