Phaser; Spectrum; Enhancer - Roland JD-08 Owner's Manual

Step buttons Parameter
[3]
drIJ
[4]
LEU
You can also press a corresponding step button to select the parameter items.

Phaser

Step
Parameter
buttons
[1]
PH. S ľ
NAn
[2]
[3]
rAtE
[4]
dEP
rESo
[5]
[6]
NiX
You can also press a corresponding step button to select the parameter items.

Spectrum

Step buttons Parameter
[1]
SP. S ľ
[2]
bnd. 1
[3]
bnd. 2
[4]
bnd. 3
[5]
bnd. 4
[6]
bnd. 5
[7]
bnd. 6
[8]
ľidt
You can also press a corresponding step button to select the parameter items.

Enhancer

Step
Parameter
buttons
EH. S ľ
[1]
[2]
SEnS
Nix
[3]
You can also press a corresponding step button to select the parameter items.
Value
Distortion that emphasizes the high end.
C. d rIJ
Gives the feeling of distortion playing through a large amp.
N. d St
Strong distortion with a bright sound.
L. d St
Thick distortion that emphasizes the low and high ends.
Fa. d S
Distortion that's even more powerful than Fa. d S.
Fv. d S
Sets the amount of distortion.
0–100
Sets the distortion output level.
0–100
Value
Turns the phaser on/off.
OFF, On
50–980 (Hz), 1. 0 – Sets the basic frequency from which the sound is modulated with the
phaser effect.
15. 0 (kHz)
0. 1 –10. 0 (Hz) Sets the cycle of the phaser modulation.
Sets the depth of the phaser modulation.
0–100
Sets the amount of feedback for the phaser. Increasing the value creates
0–100
a more unusual sound.
Sets the volume of the phased sound.
0–100
Value
Turns the spectrum on/off.
OFF, On
Sets the gain (amount of boost/cut) in the 250 Hz range.
-15–15 (dB)
Sets the gain (amount of boost/cut) in the 500 Hz range.
-15–15 (dB)
Sets the gain (amount of boost/cut) in the 1000 Hz range.
-15–15 (dB)
Sets the gain (amount of boost/cut) in the 2000 Hz range.
-15–15 (dB)
Sets the gain (amount of boost/cut) in the 4000 Hz range.
-15–15 (dB)
Sets the gain (amount of boost/cut) in the 8000 Hz range.
-15–15 (dB)
Sets the bandwidth for changing the levels, common to all bands.
1–5
Value
Turns the enhancer on/off.
OFF,
On
Sets how easily the enhancer effect is applied.
0–100
Sets the ratio at which the harmonics generated by the enhancer are mixed with the
0–100
original sound.
Explanation
Explanation
Explanation
Explanation
Configuring the Effects
35