Connecting The Camera To Your Router - Panasonic BB-HCM371A Service Manual

Item
Operation System
CPU
Protocol
Interface
Web Browser
Audio
For IPv6 Connection
Item
Operation System
CPU
Protocol
Interface
Web Browser
Audio
Note:
See Panasonic Network Camera support website at http://panasonic.co.jp/pcc/products/en/netwkcam/
for details about network environment.
7.2. CONNECTING THE CAMERA TO YOUR ROUTER
Connect the camera to your router with an Ethernet cable to set up the camera.
1. Connect the Ethernet cable (customer-provided) to the camera.
Microsoft Windows XP
Microsoft Windows 2000
Microsoft Windows Me
Microsoft Windows 98SE
-
For viewing single camera
Pentium III (800 MHz or greater is recommended.)
-
For viewing multiple cameras
Pentium 4 (1.8 GHz or greater is recommended.)
TCP/IP protocol (HTTP, TCP, UDP, IP, DNS, ARP, ICMP)
10/100 Mbps network card installed
Internet Explorer 6.0 or later (Not included on the Setup CD-ROM)
Audio input/output feature (Microphone or speaker)
Microsoft Windows XP Service Pack 1 or later
-
For viewing single camera
Pentium III (800 MHz or greater is recommended.)
-
For viewing multiple cameras
Pentium 4 (1.8 GHz or greater is recommended.)
TCP/IP protocol (HTTP, TCP, UDP, IP, DNS, ICMPPv6, NDP)
10/100 Mbps network card installed
Internet Explorer 6.0 or later (Not included on the Setup CD-ROM)
Audio input/output feature (Microphone or speaker)
Description
Description
18