Resetting The Camera To Factory Default - Panasonic BB-HCM371A Service Manual

Pressing the Factory Default Reset button resets the camera to factory default.
If you lose your user name and password, use this button to reset the camera.
- Press the Factory Default Reset button for 1 second when the camera is
on.
- The indicator blinks orange, and turn off for 10 seconds.
- Do not turn off the camera until the indicator lights green.
Note:
- Internal clock will not be reset, but the time format will return to AM/PM
mode. Set it again.
- All buffered images are deleted when resetting the camera to factory
default.
- The reset operation takes about 1 minute.
11.2. RESETTING THE CAMERA TO FACTORY DEFAULT
This feature will be executed and all camera settings reset to factory default directly after the Execute
button is clicked.
1. Click [Reset to Factory Default] on the Maintenance page.
2. Click [Execute].
- The indicator blinks orange, and turn off for 10 seconds.
- All camera settings (user name, password, IP address, subnet mask
etc.) are reset to factory default.
- If the camera is reset to factory default, the network connection
modechanges to [Automatic Setup]. Reconfigure the camera seeing the
Getting Started.
Note:
- Internal clock will not be reset, but the time format will return to AM/PM
mode. Set it again.
- Please refer to Operating Instructions for default values.
- Pressing FACTORY DEFAULT RESET button resets the camera to the
factory default.
- All buffered images are deleted when resetting the camera to factory
default.
- The reset operation takes about 1 minute.
68