SD Memory Card
Recording
*4
The camera has an SD memory card slot. You can record camera images to the SD memory card. If you
enable alarm buffer/transfer, you can record the image at the timing of signal detection of door sensor
or light. About 58,000 images (320 x240 resolution and standard quality) can be recorded to 1 GB SD
memory card. If you enable 1-minute interval timer buffer/transfer, you can record the images for about
41 days.
Enhanced Multi-Camera Page
Multi-Camera page displays up to 4 cameras while supporting each audio 2-way communication. The
previous model displays only 4 cameras, but this camera can switch 3 sets of 4 cameras. Additionally,
the camera can displays maximum 12 cameras on a page in a static image.
Supporting Viewnetcam.com service
Viewnetcam.com service allows you to access the camera over the Internet with your favorite domain
name (E.g., bob.viewnetcam.com) instead of a global IP address.
Multi-Language Display
Top page, Single Camera and Multi-Camera page can be displayed in English, French, German, Italian,
Spanish, Russian, Simplified Chinese or Japanese. The Setup, Maintenance and Support pages are
displayed only in English or Japanese.
*1) It is not possible to access the camera simultaneously by both wired and wireless connection.
*2) To connect in IPv6, subscribe to the ISP's "IPv4/IPv6 Dual-Stack" or "IPv6 over IPv4 Tunneling"
service. The camera does not work in IPv6-only network.
*3) Audio feature does not work on cell phones. Talk button and Listen button cannot be used
simultaneously. In consequence of traffic and network environments, the audio may be delayed or may
break up.
*4) SD memory card is sold separately. The camera supports 1 GB, 512 MB, 256 MB, 128 MB or 64 MB
Panasonic SD memory card.
6. PARTS LOCATIONS
6.1. FRONT VIEW
14