Using The Windows Wifi Settings To Switch Between The Wireless Dr Detector And The Wireless Hospital Network - AGFA DX-D 40C User Manual

94 | DX-D 40C, DX-D 40G | Advanced Operating
Using the Windows wifi settings to switch between the
wireless DR detector and the wireless hospital network
The NX Workstation can be configured to connect to a wireless DR Detector as
well as to a wireless hospital network.
In a configuration without System Control Unit or without a wireless access
point that is connected to the workstation, the DR Detector communicates via
the internal wireless adapter of the workstation and only one connection can
be active at a time. The user must manually switch between the wireless
connection to the hospital network and the wireless connection to the DR
Detector.
To switch between wireless networks:
1. Swipe in from the right side of the screen.
The Windows action center is displayed.
Figure 19: Windows action center with Wifi button highlighted
2. Touch the Wifi button
The available wireless networks are displayed.
3. Select the wireless network.
Figure 20: Available wireless networks
0290B EN 20190401 1627
Hospital Network
DR Detector 1
DR Detector 2
Wi-Fi
Hospital Network
DR Detector 1
DR Detector 2
Wi-Fi