Regular Inspection And Maintenance - AGFA DX-D 40C User Manual

Regular Inspection and Maintenance

In order to ensure the safety of patients, operating personnel and third
parties, and to maintain the performance and reliability of the equipment, be
sure to perform regular inspection at least once a year. Clean up the
equipment, make adjustments, or replace consumables. There may be cases
where overhaul is recommended depending on the conditions. Contact your
sales representative or local dealer for regular inspections or maintenance.
DX-D 40C, DX-D 40G | Introduction to the DR Detector | 57
CAUTION:
Clean the plug of the power cord periodically by unplugging it
from the AC outlet and removing dust or dirt from the plug, its
periphery and AC outlet with a dry cloth. If the cord is kept
plugged in for a long time in a dusty, humid or sooty place, dust
around the plug will attract moisture. This could cause
insulation failure resulting in a fire.
CAUTION:
Do not perform maintenance and inspection while the
equipment is used for a patient.
0290B EN 20190401 1627