Storage - Siemens SIMOTICS S-1FK2 Operating Instructions Manual

3. Set the motor down on a hard, level surface.
4. Secure the motor against unintentional movements.
❒
4.2.2

Storage

Note
If possible, store the motor in its original packaging.
Preserve the free shaft extensions, sealing elements, and flange surfaces with a protective
coating.
NOTICE
Seizure damage to bearings
If the motors are stored incorrectly, bearing seizure damage can occur, e.g. brinelling, as a
result of vibration.
• Comply with the storage conditions.
Storage conditions
Please observe the warning instructions on the packaging and labels.
Store the motor in a dry, dust-free, and vibration-free indoor storage facility.
Adhere to the following values:
• v
• Max. temperatures: -15° C to 55° C
• Mean relative humidity < 75%
SIMOTICS S-1FK2 synchronous motors for SINAMICS S120
Operating Instructions, 02/2022, A5E46089564B AD
WARNING
Danger of severe injury due to unintentional movements of the motor
If the motor is not secured after being set down, unintentional movements of the motor can
cause serious injury.
• After the motor has been set down, secure it in position.
• Do not release the lifting devices until the motor has been secured in position.
< 0.2 mm/s
rms
Preparing for use
4.2 Transportation and storage
55