Handling The Quick-Action Locking - Siemens SIMOTICS S-1FK2 Operating Instructions Manual

Connection diagram of the signal line for the 1F☐2 motor on the S120
The connection is made on a signal line with connector M17, 10-pin and RJ45 connector
1
2
3
Locking the round connector
Lock the round connector properly on the motor
Information on locking is provided in Chapter "Handling the quick-action locking (Page 77)".
6.3.4.2

Handling the quick-action locking

The motors are equipped with SPEED-CONNECT connectors.
You can connect quick-connection cables with SPEED-CONNECT as well as conventional cables
with screw locks (fully threaded) to the motor connector.
Note
We recommend cables with SPEED-CONNECT because they are easier to use.
SIMOTICS S-1FK2 synchronous motors for SINAMICS S120
Operating Instructions, 02/2022, A5E46089564B AD
M17 round connector, 10-pin
RJ45/IP20 connector
Connection diagram
6.3 System integration
4 Pin assignment of M17 round
connector, 10-pin
5 Pin assignment of the RJ45 con‐
nector
P 0° coded
Connecting
77