Specifications - Sharp HT-X1 Operation Manual

Specifications

HT-X1
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
" Main unit
Dimensions
Weight
Frequency range
Video output terminals
Audio output terminal
Audio input terminals
Other terminal
Signal system
Supported disc types
Video signal
66
Including the stand
Width: 17" (430 mm)
Height: 7-5/8" (192 mm)
Depth: 4" (100 mm)
Excluding the stand
Width: 17" (430 mm)
Height: 6-3/4" (171 mm)
Depth: 3-1/2" (88 mm)
4.9 lbs. (2.2 kg)
FM: 87.5 - 108 MHz
AM: 530 - 1,720 kHz
Video output: RCA type 1
S-video output: S-terminal 1
Component video output: RCA type 3
(Y/PB/PR)
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Audio input (AUX): RCA type 2
Optical digital input: Square type 1
System control 2
NTSC color
DVD (region number 1 or ALL),
DVD-R/RW (video mode),
DVD+R/RW (video mode), audio CD,
CD-R, CD-RW
Horizontal resolution: 500 lines
S/N ratio: 70 dB
Audio Frequency Linear PCM DVD:
signal characteris-
4 Hz to 22 kHz (sampling rate: 48 kHz)
tics
4 Hz to 44 kHz (sampling rate: 96 kHz)
CD: 4 Hz to 20 kHz
S/N ratio CD: 96 dB (1 kHz)
Dynamic Linear PCM DVD: 95 dB
range
CD: 94 dB
Total har- 0.006 % maximum
monic distor-
tion ratio
" Front speakers
Type Full range system (magnetic shield)
3-1/8" (8 cm) speaker 1
Maximum input power 100 W
Rated input power 50 W
Impedance 4 ohms
Dimensions Width: 4-1/8" (105 mm)
Height: 8-1/8" (205 mm)
Depth: 4-1/8" (105 mm)
Weight 2.0 lbs. (0.9 kg)/each