To Start Playback From The Desired Point (Direct Play) - Sharp HT-X1 Operation Manual

Basic operation (continued)
HT-X1
" To start playback from the desired point (direct
play)
To select and play the desired title:
Playback starts from chapter 1 of the selected title.
1
While in the stop or playback mode, press the DIRECT but-
ton.
2
Within 10 seconds, select the title by pressing the cursor
( or ) button.
3
Enter the desired title number by using
the direct number buttons.
4
Within 10 seconds, press the ENTER button.
To select and play the desired chapter:
1
Perform steps 1 - 3 of "To select and play the desired title"
above.
2
Within 10 seconds, select the chapter by pressing the cur-
sor ( or ) button.
3
Enter the desired chapter number by
using the direct number buttons.
4
Within 10 seconds, press the ENTER button.
Notes:
! Direct play feature is disabled on some discs.
! Some discs may not display the chapter number.
32
Entering title or chapter numbers using the direct number buttons:
If the number is 2 digits or more, press "+10" and enter the number.
Example:
To select chapter 1, press "1".
To select chapter 12, press "+10" and "2".
To select chapter 22, press "+10", "+10" and "2".
To select chapter 112, press "+10" eleven times and press "2".
Title number
To play by specifying time (time search):
1
While a disc is playing, press the DIRECT button.
01 / 08
2
Within 10 seconds, select the time by
pressing the cursor ( or ) button.
3
Specify the time by using the direct number buttons.
! To specify 1 hour 23 minutes and 40 seconds, enter
"012340".
! If you enter the wrong number, start over from step 1.
4
Within 10 seconds, press the ENTER button.
Chapter number
Notes:
! Some discs cannot play from the specified point.
! Time search feature is disabled on some discs.
001 / 010 --:--:--
Time