System Installation - Sharp HT-X1 Operation Manual

Sharp model ht-x1 home theater with dvd operation manual
Hide thumbs Also See for HT-X1:
Table of Contents

Advertisement

System installation

Installation image (with optional accessories):
Front
speaker
Subwoofer/
(left)
amplifier
unit
Surround
speaker
(left)
" Magnetically shielded speakers
The front and center speakers may be placed beside or near the TV
as they are magnetically shielded. However, color variation may
occur, depending on the type of the TV.
If color variation occurs...
Turn off the TV (from the power switch).
After 15 - 30 minutes, turn the TV on again.
If the color variation is still present...
Move the speakers further away from the TV.
Refer to the user's manual of the TV for details.
Note:
The surround speakers and subwoofer/amplifier unit are not mag-
netically shielded.
" Placing the speaker system
The best surround effect will be achieved by placing each
speaker at the same distance from the listening position.
It is recommended to arrange the speakers as shown below.
Center
Front
speaker
speaker
(right)
Main
unit
Surround
speaker
(right)
Notes:
! The default distance is set to 6 feet (2 m). If speakers cannot be placed
at equal distances, refer to "Speaker delay setting" (see page 53).
! Place the TV halfway between the front speakers.
! It is recommended that the center speaker be placed near the
television.
! Place the surround speakers at a position just above the height of
your ears.
! Place the subwoofer/amplifier unit on a sturdy and stable surface as
it tends to vibrate while reproducing bass sounds.
Center
speaker
Front speaker (left)
Subwoofer/
amplifier unit
Surround
speaker (left)
Same distance
Front speaker
(left)
Center speaker
HT-X1
Front speaker (right)
Default setting:
6 feet (2 m)
Surround
speaker (right)
Front speaker
(right)
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents